Operating Basics 2
Operating Guide 25
Instrument Control
The Agilent 7890A GC is typically controlled by an attached
data system such as Agilent ChemStation. Alternately, the
GC can be controlled entirely from its keypad, with output
data being sent to an attached integrator for report
generation.
Agilent Data System Users – Please refer to the online help
included in the Agilent Data System for details on how to
load, run, or create methods and sequences using the data
system.
Standalone GC Users – If you are running your GC without
an attached data system, for details on loading methods and
sequences from the keypad see:
• “To load a method”
• “To load a sequence”
For details on running methods and sequences from the
keypad see:
• “To manually inject a sample with a syringe and start a
run”
• “To run a method to process a single ALS sample”
• “To start running a sequence”
Refer to the Advanced User Guide for details on how to
create methods and sequences using the GC keypad.
To Next Page
Loading...
Need help?
General
