Return Loss Meters Error Messages
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition 403
error message E10081: Safety comparator <a> test failed (b, c)
description Checks whether laser current safety comparator includes at the
right conditions a safety interrupt at the CPU
test value a laser number
b shows whether the interrupt flag was raised when the
current was lower than the limit
c shows whether the interrupt flag was raised when the
current was higher than the limit
action Please return the unit to your local service center for repair
To Next Page
Loading...
Need help?
General
