Agilent Technologies 8560E - GD Gate Delay; Figure 7-126 GD Syntax; Figure 7-127 GD Query Response

484 Chapter7
Language Reference
GD Gate Delay
GD Gate Delay
Syntax
Figure 7-126 GD Syntax
Description
The GD command sets the delay time from when the gate trigger occurs
to when the gate is turned on. GD applies only if GATECTL is set to
EDGE.
Parameters
number real from 3 µs to 65.535 ms
Preset State
3 µs
Query Response
Figure 7-127 GD Query Response
Example
OUTPUT 718;"GD 20US;"
Sets the gate delay to 20 µ s.