552 Chapter7
Language Reference
OCCUP Percent Occupied Power Bandwidth
OCCUP Percent Occupied Power Bandwidth
Syntax
Figure 7-200 OCCUP Syntax
Description
The OCCUP command is used to query the current value of the percent
occupied power. This percentage is set by the DELMKBW and PWRBW
commands. The OCCUP command can also be used to set the percent
occupied power.
Parameters
number real from 1.00 to 99.99
Query Response
Figure 7-201 OCCUP Query Response
Example
10 OUTPUT 718;"OCCUP?;"
20 ENTER 718;Percent_pwr
To Next Page
Loading...
