Agilent Technologies 8560E - MKT Marker Time; Figure 7-185 MKT Syntax; Figure 7-186 MKT Query Response

538 Chapter7
Language Reference
MKT Marker Time
MKT Marker Time
Syntax
Figure 7-185 MKT Syntax
Description
The MKT command places a marker at a position that corresponds to a
specified point in time during the sweep. Default units are seconds.
Parameter
number real from 0 to the current sweep time.
Preset State
Off
Query Response
Figure 7-186 MKT Query Response
Example
10 OUTPUT 718;"ST 2S;MKT 1.6S;"
20 END