Agilent Technologies 8560E - MKCF Marker to Center Frequency; Figure 7-157 MKCF Syntax

Chapter 7 509
Language Reference
MKCF Marker to Center Frequency
MKCF Marker to Center Frequency
Syntax
Figure 7-157 MKCF Syntax
Description
The MKCF command sets the center frequency to the frequency value
of an active marker.
Example
10 OUTPUT 718;"IP;SNGLS;"
20 INPUT "ENTER IN DESIRED START FREQUENCY, IN MHZ",Fa
30 INPUT "ENTER IN DESIRED STOP FREQUENCY, IN MHZ",Fb
40 OUTPUT 718;"FA ";Fa;"MHZ;"
50 OUTPUT 718;"FB ";Fb;"MHZ;"
60 OUTPUT 718;"TS;MKPK HI;MKCF;TS;"
70 END