Agilent Technologies 8712ET - Page 172

10-44 Programmer’s Guide
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
Table 10-16 MARKER Functions, 8712ES and 8714ES (3 of 3)
KEYSTROKES SCPI COMMAND
MARKER, Marker Search, (continued)
Min Search, (continued)
Next Min Left CALC[1|2]:MARK:MIN:LEFT
Next Min Right CALC[1|2]:MARK:MIN:RIGH
Target Search CALC[1|2]:MARK:FUNC TARG
Target Value (enter value,
and units)
CALC[1|2]:MARK:TARG <LEFT|RIGH>,<num>
[DB]
Search Left (enter value,
and units)
CALC[1|2]:MARK:TARG LEFT,<num> [DB]
Search Right (enter value,
and units)
CALC[1|2]:MARK:TARG RIGH,<num> [DB]
Bandwidth (enter value,
and units)
CALC[1|2]:MARK:FUNC BWID
CALC[1|2]:MARK:BWID <num> [DB]
Notch (enter value,
and units)
CALC[1|2]:MARK:FUNC NOTC
CALC[1|2]:MARK:NOTC <num> [DB]
More (menu selection only)
Multi Peak CALC[1|2]:MARK:FUNC MPE
MultiNotch CALC[1|2]:MARK:FUNC MNOT
Search Off CALC[1|2]:MARK:FUNC OFF
Tracking ON off CALC[1|2]:MARK:FUNC:TRAC [ON|OFF]