Programmer’s Guide 10-53
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
Table 10-22 POWER Functions, 8712ET/ES and 8714ET/ES (2 of 2)
1. This softkey is valid for power sweeps only.
KEYSTROKES SCPI COMMAND
POWER, (continued)
Stop Power
1
(enter value,
and unit)
SOUR:POW:STOP <value>; *WAI
dBm (units choice)
dBW (units choice)
dBuW (units choice)
dBV (units choice)
dBmV (units choice)
dBuV (units choice)
Cancel (cancels entry)
Pwr Level at Preset (enter value,
and unit)
SOUR:POW:PRESET<value>
dBm (units choice)
dBW (units choice)
dBuW (units choice)
dBV (units choice)
dBmV (units choice)
dBuV (units choice)
Cancel (cancels entry)
To Next Page
Loading...
