Agilent Technologies 8712ET - Page 180

10-52 Programmer’s Guide
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
Table 10-22 POWER Functions, 8712ET/ES and 8714ET/ES (1 of 2)
1. This softkey is valid for frequency sweeps only.
2. This softkey is valid for power sweeps only.
KEYSTROKES SCPI COMMAND
POWER (hardkey entry)
Level
1
(enter value,
and unit)
SOUR[1|2]:POW <value>; *WAI
dBm (units choice)
dBW (units choice)
dBuW (units choice)
dBV (units choice)
dBmV (units choice)
dBuV (units choice)
Cancel (cancels entry)
RF ON off OUTP[ON|OFF]; *WAI
Start Power
2
(enter value,
and unit)
SOUR:POW:STAR <value>; *WAI
dBm (units choice)
dBW (units choice)
dBuW (units choice)
dBV (units choice)
dBmV (units choice)
dBuV (units choice)
Cancel (cancels entry)