Programmer’s Guide 10-69
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
Table 10-28 SYSTEM OPTIONS Functions, 8712ET/ES and 8714ET/ES (8 of 9)
1. For use with multiport test sets only.
KEYSTROKES SCPI COMMAND
SYSTEM OPTIONS, Sys Config, (continued)
User TTL Config (menu selection only)
Default SYST:COMM:TTL:USER:FEED DEFAULT
Softkey Auto-Step SYST:COMM:TTL:USER:FEED KEY
Sweep Out SYST:COMM:TTL:USER:FEED SWEEP
Switching Test Set (menu selection only)
Multiport ON off
1
CONT1:MULT:STATE [ON|OFF]
Special Test Set (special test set use)
Operating Parameters (seven pages of
parameters)
(menu selection only)
Hardcopy Screen (no SCPI command)
Hardcopy All (no SCPI command)
Abort HCOP:ABOR
Next Screen (screen selection only)
Previous Screen (screen selection only)
Service (menu selection only)
Tests and Adjustments (menu selection only)
Select Self-Test (no SCPI command)
Select Adjustment (no SCPI command)
Execute Test (no SCPI command)
Stop Test (no SCPI command)
Instrument Info (no SCPI command)
To Next Page
Loading...
