Agilent Technologies 8712ET - Page 215

Programmer’s Guide 11-17
SCPI Command Summary
SCPI Device Command Summary
Table 11-6 DIAGnostic (4 of 4)
1. Refer to "Controlling Peripherals" in Chapter 7 of the User's Guide for more infor-
mation on using this command. See also Table 11-7 on page 11-18 and Table 11-8 on
page 11-19.
2. See “Controlling Peripherals” in Chapter 7 of the User’s Guide for more information
on using this command. See also Table 11-7 on page 11-18 and Table 11-8 on
page 11-19.
SUBSYSTEM COMMANDS FORM DESCRIPTION
DIAGnostic:PORT:READ?
<port><register>
1
query
only
NR1,
NR1
Reads the rear panel I/O ports.
DIAGnostic:PORT:WRITE
<port><register>
2
NR1,
NR1,
NR1
Writes to the rear panel I/O ports.
DIAGnostic:SNUMber <string>? query
only
STRING
Queries the instrument's serial
number.
DIAGnostic:SPUR:METHod
<NONE|DITHer|AVOid>
NR1 Selects the spur avoid mode.