11-66 Programmer’s Guide
SCPI Command Summary
SCPI Device Command Summary
Table 11-24 SYSTem (8 of 8)
SUBSYSTEM COMMANDS FORM
DESCRIPTION
TEST:RESult? query
only
CHAR
Queries the result of the selected
adjustment or self-test — the
response will be
NULL|PASS|FAIL.
TEST:SELect <num> NR1 Selects the adjustment or self-test
to execute.
TEST:STATe <char> CHAR Selects the state of the active
adjustment or self-test — choose
from RUN|CONTinue|STOP for
the command. Query returns
NULL|RUN|PAUS|DONE.
TEST:VALue <num> NR1 Sets or queries a value for an
adjustment or self-test.
To Next Page
Loading...
