Agilent Technologies 8712ET

2-4 Programmer’s Guide
Synchronizing the Analyzer and a Controller
Overlapped Commands
ROUTe[1|2]:TRANsmission:DEFine:PORT <num>
SENSe[1|2]:AVERage:CLEar
SENSe[1|2]:AVERage:COUNt
SENSe[1|2]:AVERage[:STATe]
SENSe[1|2]:BWIDth[:RESolution]
SENSe[1|2]:CORRection:CLASs[:SELect]?
SENSe[1|2]:CORRection:COLLect[:ACQuire]
SENSe[1|2]:CORRection:COLLect[:ACQuire] STANdard1-7
SENSe[1|2]:CORRection:COLLect:CKIT:PORT[1|12]
[:SELECT]
SENSe[1|2]:CORRection:COLLect:ISTate[:AUTO]
SENSe[1|2]:CORRection:COLLect:METHod
SENSe[1|2]:CORRection:COLLect:METHod TWOPort
SENSe[1|2]:CORRection:COLLect:SAVE
SENSe[1|2]:CORRection:CSET[:SELect]
SENSe[1|2]:CORRection[:STATe]
SENSe[1|2]:CORRection:ONEPort:REFLection[:IMMediate]
SENSe[1|2]:CORRection:ONEPort:TRANSmission
[:IMMediate]
SENSe[1|2]:CORRection:TWOPort[:IMMediate]
SENSe:COUPle
SENSe[1|2]:DETector[:FUNCtion]
SENSe[1|2]:DISTance:STARt (Option 100 only)
SENSe[1|2]:DISTance:STOP (Option 100 only)
SENSe[1|2]:FREQuency:CENTer
SENSe[1|2]:FREQuency:MODE (Option 100 only)
SENSe[1|2]:FREQuency:SPAN
SENSe[1|2]:FREQuency:SPAN:MAXimum
SENSe[1|2]:FREQuency:STARt