Agilent Technologies 8712ET

Programmer’s Guide 2-5
Synchronizing the Analyzer and a Controller
Overlapped Commands
SENSe[1|2]:FREQuency:STOP
SENSe[1|2]:FUNCtion
SENSe[1|2]:FUNCtion ‘FLOC . . .
SENSe[1|2]:FUNCtion ‘SRL . . .
SENSe[1|2]:FUNCtion ‘XFR:GDEL:RAT . . .
SENSe[1|2]:FUNCtion ‘XFR:POW . . .
SENSe[1|2]:FUNCtion ‘XFR:POW:RAT . . .
SENSe[1|2]:FUNCtion ‘XFR:S . . .
SENSe[1|2]:FUNCtion:SRL:SCAN[:IMMediate] (Option 100
only)
SENSe:ROSCillator:SOURce
SENSe[1|2]:STATe
SENSe[1|2]:SWEep:POINts
SENSe[1|2]:SWEep:TIME
SENSe[1|2]:SWEep:TIME:AUTO
SENSe:SWEep:TRIGger:SOURce
SOURce[1|2]:POWer[:LEVel][:IMMediate][:AMPLitude]
SYSTem:PRESet
TRACe[:DATA]
TRACe:CORRection:SIMulate:SAVE-?<TRANsmission1|...>
TRIGger[:SEQuence]:SOURce