Agilent Technologies 8860 Installation And First Startup

1 Installing the GC
Installation and First Startup 25
Step 5 Configure the GC IP address
If you intend to connect your system to your site’s network, each piece of equipment must
have a unique IP address assigned to it. For an isolated LAN installation, see Table 3 for typical
IP addresses.
1 Select the IP Config page.
2 Enter the GC IP address, Gateway, and Netmask (subnet mask).
Table 3 Typical IP addresses for an isolated LAN
GC Computer
IP address 10.1.1.101 10.1.1.100
Subnet mask 255.255.255.0 255.255.255.0

Agilent Technologies 8860 Specifications

General

Brand	Agilent Technologies
Model	8860
Category	Laboratory Equipment
Language	English