4-120
Screens
SMS Cell Broadcast
4. Language This field selects the data coding scheme used for the message. “Default GSM” sets
the value of the data coding scheme to 0xF0. The default for message 1 is “English”.
The default for message 2 is “German”.
Choices German
English
Italian
French
Spanish
Dutch
Swedish
Danish
Portuguese
Finnish
Norwegian
Greek
Turkish
Default GSM
5. Message
Broadcast
This field can be toggled between Enabled and Disabled. The default state is
Disabled, when in the Enabled state, the system information 4 element on the BCCH
indicates that an SD/4 configured CBCH is present. The CBCH is being sent using
the messages indicated in the Messages To Send field.
NOTES If Enabled is selected and the protocol reports any errors, for example, the BCH is
not configured as SD/4, an error is produced and the status returns to disabled. In this
example, the message “BCH must be activated as SD/4 CBCH has been disabled.”
appears.
Whilst this field is set to Enabled and the Broadcast Status field is displaying Sending
you cannot change any of the message attribute fields. If you attempt to change a field
the message “Cannot change message parameters while broadcasting message”
appears.
Choices Enabled
Disabled
To Next Page
Loading...
Need help?
General
