Agilent Technologies 8922M User Manual

4-8
Screens
Bit Error
Bit Error
1. Amplitude (Base
Station)
This field changes the RF generator amplitude. It is a duplicate of the RF generator’s
Amplitude field on the RF Generator/RF Analyzer screen.
See Also Screens: RF Generator/RF Analyzer (RF Generator).
2. BE Ratio This field selects how bit errors will be displayed.
Choices BE Count displays the total number of bit errors.
BE Ratio calculates and displays the ratio of bit errors counted to
the total number of bits measured (depends on measurement type).
3. BE Ratio/Count This field displays the result of the bit error ratio after all the bits have been tested.
4. Intermediate
Results
This field displays the number of bits that have been tested during a measurement
that is currently running. This number includes only bits that are tested by the
selected measurement type.
315 715
4
15
8
1161105
13
14
12
2
15
9

Agilent Technologies 8922M Specifications

General

Brand	Agilent Technologies
Model	8922M
Category	Test Equipment
Language	English