2-25
Making Measurements
Measurements
NOTE The RF Generator and spectrum analyzer can be tuned to different frequencies
allowing the inspection of the IF signals inside the mobile phone.
Figure 2-12 Spectrum Analyzer Measurement
Use the MeasReset (2) to reset the trace and measurements in the Agilent 8922M/
S. This is useful if you are using the Max Hold field (3).
The resolution bandwidth of the spectrum analyzer is automatically coupled to the
frequency span. Reducing the span to less than 200 kHz can be useful when
checking the mobile phone’s transmitter.
1
2
3
To Next Page
Loading...
