2-34
Making Measurements
If You Have Problems with a Measurement
Is an Error Message
Displayed in the
Sync Status field?
The sync status field displays an error message for the following errors:
• Bad Sync - demodulation error, perform a Phase/Frequency error measurement
to identify which of the Sync Status error listed below may be the possible
problem.
• FM Errors - see solutions 1, 2, 3, 4
• Short Burst - see solutions 1, 4
• Level Late - see solutions 1, 2, 3, 4
• Level Short - see solutions 1, 2, 3, 4
• Low Level- see solution 3
• RF Ovrload - see solution 3
To Next Page
Loading...
