Agilent Technologies G1314B - Page 54

54 Agilent 1260 Infinity VWD User Manual
4 Using the Detector
Setting up an Analysis
Conditions
A single injection of the isocratic test standard is made under the
conditions given in Table 8 on page 54:
Tabl e 8 Conditions
Flow 1.5 mL/min
Stoptime 8 min
Solvent 100% (30% water/70% Acetonitrile)
Temperature Ambient
Wavelength sample 254 nm
Injection Volume 1 µL
Column Temperature (optional): 25 °C or ambient