Agilent Technologies U1231A User Manual

1 Introduction
Preparing Your Multimeter
12 U1231A/U1232A/U1233A User’s Guide
Ensure that the Agilent logo on the U1173A IR- USB cable
(purchased separately) connected to the multimeter is facing
up. Firmly push the IR head into the multimeter’s IR
communication port until it snaps into place (see
Figure 1- 3).
Refer to the Agilent GUI Data Logger Software Help and
Quick Start Guide for more information on the IR
communication link and the Agilent GUI Data Logger
software.
Figure 1-4 Agilent GUI Data Logger Software
The Agilent GUI Data Logger software and its supporting
documents (Help and Quick Start Guide) are available as
free downloads from http://www.agilent.com/find/hhTechLib.
You may purchase a U1173A IR- USB cable from an Agilent
Sales Office nearest to you.
NOTE
Communication settings for U1231A/U1232A/U1233A
The baud rate, data bits, and parity bit are fixed respectively to 9600 bps,
8-bit, and none for the U1231A/U1232A/U1233A handheld digital
multimeter. Ensure that the communication settings on the Agilent GUI
Data Logger match the communication settings mentioned in this note.

Agilent Technologies U1231A Specifications

General

Brand	Agilent Technologies
Model	U1231A
Category	Multimeter
Language	English