Agilent Technologies U1231A User Manual

2 Making Measurements
Measuring Resistance
40 U1231A/U1232A/U1233A User’s Guide
Figure 2-9 Measuring resistance
NOTE
• Because the multimeter’s test current flows through all possible paths
between the probe tips, the measured value of a resistor in a circuit is
often different from the resistor’s rated value.
• The resistance function can produce enough voltage to forward-bias
silicon diodes or transistor junctions, causing them to conduct. If this is
suspected, press to apply a lower current in the next higher range.
A
u
t
o
R
a
n
g
e
4
1
3
Resistor
2

Agilent Technologies U1231A Specifications

General

Brand	Agilent Technologies
Model	U1231A
Category	Multimeter
Language	English