1 Introduction
Cleaning Your Multimeter
30 U1231A/U1232A/U1233A User’s Guide
Cleaning Your Multimeter
Dirt or moisture in the terminals can distort readings.
Follow the steps below to clean your multimeter.
1 Turn the multimeter off and remove the test leads.
2 Turn the multimeter over and shake out any dirt that may
have accumulated in the terminals.
Wipe the case with a damp cloth and mild detergent — do
not use abrasives or solvents. Wipe the contacts in each
terminal with a clean swab dipped in alcohol.
To avoid electrical shock or damage to the multimeter, ensure that
the insides of the casing stay dry at all times.
To Next Page
Loading...
Need help?
General
