Chapter 3: Installation
VSpin User Guide
36
Installing the Software
Introduction After connecting the VSpin to the controlling computer, you need to
install the software, which includes the VSpin Diagnostics software.
Procedure To install the VSpin Software:
1. Place the VSpin CD into your CD ROM drive.
2. If the startup program does not start automatically:
a. Double-click the
My Computer icon.
b. Double-click your CD drive icon.
c. Double-click to open the folder
VSpin vX.Y.Z with Access2
vvX.Y.Z
, where X.Y.Z are the current version numbers.
The Access2 software is included even if you don’t have an
Access2.
d. Double-click
Setup.exe
The InstallShield Wizard appears.
3. Click
Next from the InstallShield welcome screen.
4. Enter your customer information and click
Next.
5. Choose
Complete or Custom install.
If you chose
Complete install, go to step 7.
If you chose
Custom install, you can specify an install location other
than the default directory (C:\Program Files\Velocity11\VSpin), and
select portions of the software to install.
6. Click Next.
The
Setup Status dialog box appears while setup is in process and
the message
InstallShield Wizard Complete appears when setup is
complete.
7. Click
Finish.
You can now control the VSpin from your computer.
To Next Page
Loading...
Need help?
General
