Chapter 4: Performing a Spin
VSpin User Guide
48
Starting the Software
Overview This section explains how to start the VSpin test container software and
open the VSpin Diagnostics software, with which you can directly
control the VSpin.
For use in a lab automation system, you would open the VSpin
Diagnostics, create a profile, select the profile and control the spin, all
through the lab automation software.
Procedure To start the VSpin Diagnostics software:
1. Click
Start > Programs > Velocity11 > VSpin > VSpin Test Container.
The
VSpinApp dialog box opens.
2. Click
OK.
The
VSpin Control dialog box opens.
If you receive an error, see “VSpin Error Reference” on page 79.
Where to Go Next Before you start a spin, refer to the “Workflow Overview” on page 46.
To Next Page
Loading...
