71
Chapter 5: Maintenance and Troubleshooting
VSpin User Guide
Removing the Buckets
Overview You need to remove the buckets before cleaning or moving the VSpin.
To access the buckets, you must open the door manually
Removing a Bucket To remove a bucket:
1. Make sure the power and air are turned off.
2. Open the door manually.
See “Unlocking and Opening the Door Manually” on page 69.
3. Pivot the bucket in towards the center of the VSpin and pull the
bucket towards you until it comes free of the pins.
4. Rotate one end of the bucket towards you, and turn it upside down.
5. Remove the bucket from the door.
00108
VSpin
Rotor assembly - bucket rotated
00108
Bucket
Pin
00114
VSpin
bucket removed
00114
To Next Page
Loading...
Need help?
General
