61
Chapter 4: Performing a Spin
VSpin User Guide
Monitoring the Progress of a Spin
Overview You can monitor the progress of a spin by observing the change in
parameters such as speed, duration, and error messages.
Checking the
Rotational Speed
You can see the rotational speed of the VSpin rotor in the Tachometer
display in the Control page. This is displayed in RPM.
See “Setting the Maximum Velocity” on page 52 for setting the maximum
speed of the VSpin.
Checking the
Current Bucket
Position
You can check the bucket position from all three pages. For more
information, see “About Teachpoints” on page 13.
To check the current bucket position:
1. Either:
Check the Current position box in the Position group box on the
Control page.
Check the value to the right of the Teach button in the
Teachpoint for Bucket Position group box on the Profiles page.
Check the Current position box in the Position group box on the
Diagnostics page.
To align the buckets to the door, see “Teaching the Bucket Position” on
page 41.
To Next Page
Loading...
Need help?
General
