Chapter 5: Maintenance and Troubleshooting
VSpin User Guide
68
Preparing to Clean the VSpin
Overview Perform the following procedures before cleaning the VSpin:
!! DAMAGE HAZARD !! Disconnect power, air and serial cable
before performing any cleaning or maintenance.
Step Procedure Comments
1.
Disconnect the power supply. Pull out the power cord.
2.
Disconnect the air supply. See “Disconnecting the Air Supply”
on page 67.
3.
Disconnect the serial cable Pull out the serial cable.
4.
Unlock and open the door See “Unlocking and Opening the
Door Manually” on page 69.
5.
Remove the buckets See “Removing the Buckets” on
page 71
To Next Page
Loading...
Need help?
General
