Agilent Technologies Velocity11 VSpin User Manual

Chapter 4: Performing a Spin
VSpin User Guide
64
Shutting Down the VSpin
When to Use Shut down the VSpin if you intend to:
❑ Move it
❑ Perform maintenance
Procedure To shut down the VSpin:
1. Close any open profiles
See “Closing a Profile” on page 50.
2. Turn the power off at the on/off switch.
3. Wait 10 seconds for the power supply to discharge before handling
or moving the VSpin.

Agilent Technologies Velocity11 VSpin Specifications

General

Brand	Agilent Technologies
Model	Velocity11 VSpin
Category	Laboratory Equipment
Language	English