57
Chapter 4: Performing a Spin
VSpin User Guide
Choose the same plate as the type that you use for the sample
plate.
If you use something other than a plate, the object must have the
same dimensions as a plate so that it can be properly constrained
within the bucket. Consult Velocity11 with any questions.
3. From the
Control page, choose a bucket to hold the counterweight.
For example, if you choose bucket 2:
a. Select
Bucket 2 in the Bucket to Present group box on the
Control page.
b. Click
Go to bucket in the Execute group box.
The door opens on bucket 2.
4. Place the counterweight onto plate 2.
Be careful not to spill any fluid if you use a plate with fluid in its
wells.
The VSpin is now ready to spin sample plates on bucket 1 that are within
10 grams of the counterweight on bucket 2.
Where to Go Next Before you start a spin, refer to the “Workflow Overview” on page 46.
To Next Page
Loading...
Need help?
General
