according to the light of vehicles ahead, driving in the opposite or same direction, and ambient light.
Whileensuring sufficient driving light conditions, it can also avoid the vehicle’s high beams dazzling drivers
coming from the opposite or same direction.
Smart high beam activa-
tion indicator lamp
Smart high beam ena-
bling indicator lamp
You can turn off the IHBC function in the control panel. When the IHBC function is turned off, the
intelligent high beam indicator lamp on the instrument will be off.
PATH: Vehicle Control - Setting - Lighting -Automatic switching of high beam and low beam
CAUTION:
●
When the speed is less than 25km/h, the IHBC function will exit.
●
Frequent switching of high beam will cause the vehicle ahead to misjudge the driving intention of the
vehicle, increase the driving risk, and belong to uncivilized driving behavior.
Therefore, the IHBC function will be suppressed for a period of time after switching to the high beam
and low beam, and will no longer switch the light immediately.
●
After the driver actively operates the light lever to switch to the high beam, the IHBC function will be
suppressed for 3 minutes, and will no longer switch the light immediately.
150 | AIWAYS U5
To Next Page
Loading...
