PATH: Settings - Connect – WLAN
Connection between mobile phone and IVI
Carbit
Carbit is an intelligent app connecting a mobile phone and IVI (IVI, In-Vehicle Infotainment touchscreen).
The connection between a mobile phone and IVI function of Carbit can map voice assistant, navigation,
music, phone and other applications from the mobile phone on the console screen, and supports the
addition of third-party applications. The app supports both Android (version 9.0 and above) and IOS
(version 7.3 and above).
The following situations may lead to the failure of normal connection and use of the connection between
mobile phone and IVI function:
●
The data cable used for connection only has charging function, no data transmission function. It is
recommended that you use the original data cable provided with the mobile phone (plug in again if
there is no response);
●
When the APP is running, relevant permissions need to be obtained, such as the permission to “enable
USB debugging mode.” Some brands of mobile phones (such as Xiaomi) can automatically pop up the
“enable USB debugging mode” dialog box when connecting the IVI. Some brands of mobile phones
(such as Huawei) need to enter the developer mode to set it up. The general setting method is as
follows: “Settings – About phone – Version number.” Click the version number repeatedly until the
developer mode interface pops up. Enter the developer mode interface and enable the corresponding
permissions.
You can connect the mobile phone and the car according to the following operations:
1. Turn on the Carbit function of IVI, scan the QR code with your mobile phone, follow the pop-up prompt,
then go to the Carbit details page, access Google Play to download the “Easyconnection” application
and complete the installation (you can also choose “Download,”, install it in the browser, and then enter
the corresponding authorization when the app is running);
2. Connect one end of the mobile phone data cable to the USB of IVI, and the other end to the mobile
phone;
AIWAYS U5 | 79
To Next Page
Loading...
