●
If the headrest touches the child safety seat, you will need to remove the headrest.
●
In the process of installing the pull-up belt, you can dismantle the headrest if necessary, and remove the
cover to make sure that the belt can be used smoothly.
i-Size child seats
The table gives a recommendations for which i-Size child seats suit which positions,, and for what size of
child.
The child seat must be approved in accordance with UN R129.
NOTE: Always read the owner’s manual section on installing a child seat before installing one in the car.
Type of child seat
Front seat (with
deactivated
airbag, only rear-
facing child
seats)
Front seat (with
activated airbag,
only front-facing
child seats)
Outer rear seats Centre rear seats
i-Size child seats X X i-U X
i-U: Suitable for i-Size universal child seat, front-facing and rear-facing;
X: Not suitable for universally approved child seats.
Example of detailed information e.g. for child restraint system manufacturers:
This table gives technical information specifically intended e.g. for child restraint system manufacturers
and translation into national languages is not required.
46 | AIWAYS U5
To Next Page
Loading...
