1. USB interface 2. Storage 3. 12 V power interface
Once you and passengers are on board, press the brake pedal to charge your mobile device. Connect the
appropriate ends of the charging cable to the USB interface and your device, place your mobile device in
the storage slot and it will start charging. The 12 V power interface can be used as the power interface for
other on-board equipment such as air pump.
If your car is equipped with wireless charging function, press the brake pedal and place mobile device that
supports wireless charging in the storage slot to start charging.
NOTE: The output voltage of the power interface is 12V, and the maximum output power is 120W. Do not
use any on-board electrical equipment beyond the maximum power.
Sun visor
There are adjustable sun visors in front of the driver and front passenger seats.
AIWAYS U5 | 27
To Next Page
Loading...
