1. Adjust the seat cushions and backrests properly for comfortable driving; Pull the metal tongue on the
upper part of the side trim panel, pull out the seat belt out to the proper length, place the belt across
the front chest from the shoulder, make sure that one shoulder and arm are kept between the shoulder
belt and the crotch belt, and press the metal tongue untwisted into the seat belt buckle on the other
side of your body. When you hear a "click" sound the seat belt is locked.
2. Pull the shoulder belt and the crotch belt, confirm that the seat belt is firmly fastened and not twisted,
and then adjust it for comfort.
Unfastening the seat belt
Press the red unlock button in the buckle to unfasten the seat belt and its metal tongue which restore to
the original position along the rolling direction.
WARNING:
●
The seat belt should be tightened properly. If too loose or tight, the seat belt can not play its protective
role to the greatest extent in the event of any accident, or even cause additional injuries.
●
If any seat belt is twisted and knotted in the side trim panel, you need to pull and hold the metal tongue,
pull out the seat belt slowly and carefully, smooth the twist, and then guide it back into the side trim
panel.
AIWAYS U5 | 57
To Next Page
Loading...
