After entering your car, close the doors, adjust your seat, fasten your seat belt and start your car.
The smart key needs to be with you or inside the car:
1. Press the brake pedal for the power battery to provide power. You can now use the air conditioner and
other electrical equipment;
2.
Keep the brake pedal pressed, turn the gearshift knob
left and switch the gear to neutral; the
instrument panel will display the status “Ready;”
3.
Keep the brake pedal pressed, turn the shift knob
right to enter drive gear D, or left to enter
reverse gear R;
4. Release the brake pedal and the vehicle will move forward slowly.
CAUTION: If the instrument prompts you that “No smart key is detected” when you follow the above
operation, it means that there is no key in your car, the key is low in battery power or the key cannot be
detected due to interference.
At this time, please put your smart key into any cup holder in front of the central armrest box to restart
your car. If it still cannot be started, please contact your Aiways Service Partner immediately for
troubleshooting.
Electronic Parking Brake (EPB)
Activation
●
After your car is parked completely with the gear switched to P (Park), the electronic parking brake will
be automatically activated.
●
To activate the electronic parking brake manually, pull up the electric parking switch
by hand
before parking or leaving your car.
The activated electronic parking brake can be indicated by the illuminated control indicator
on the
electronic parking brake switch and in the instrument.
AIWAYS U5 | 89
To Next Page
Loading...
Need help?
General
