Make sure that the seat belt buckle has its red release button raised or tilted up, so that you can press the
button quickly to unfasten the seat belt when necessary. Please check whether the seat belt OFF indicator,
seat belts, metal tongues, buckles, retractors and fixtures work normally:
●
Insert the metal tongue of the seat belt into the buckle, tighten the seat belt quickly near the buckle and
the seat belt is fastened and locked;
●
Push in the metal tongue, quickly pull the seat belt forward and the lock mechanism locks automatically
and prevents the seat belt from being pulled out;
●
Extend the seat belt completely, check whether it can retract smoothly and ensure that there are no
cuts, cracks, severe wear or other abnormality on your seat belt;
●
Let your seat belt retract completely and check that the movement is smooth and continuous;
●
Check the seat belt system to see whether it is loose or damaged and whether there is any part that may
affect normal operation of the seat belt system;
●
Check whether the seat belt OFF indicator
is working properly.
If the car fails to pass any of the above checks, please contact your Aiways service partner immediately
for troubleshooting.
Seat belt maintenance
●
Do not modify or remove the seat belt system without authorization. The seat belt system must have its
parts and components repaired by professionals only.
●
Only use neutral soap and warm water to clean the seat belt. Never use any solvent to wash the seat
belt. Never bleach or dye the seat belt; this may severely weaken the seat belt’s strength.
●
After cleaning, the seat belt should be dried with clean cloth and kept in the shade. Never retract your
seat belt before it has dried completely; allow it to dry in a clean location outside first.
●
If the seat belt retractor is contaminated with dirt, the seat belt will retract slowly; please clean the dirt
with dry cloth.
60 | AIWAYS U5
To Next Page
Loading...
