●
After the SCC function exits, if the ACC function activation conditions are met, the system will
automatically enter the ACC mode and control the vehicle to rapidly accelerate for a short time, the
driver shall pay special attention.
●
When the target vehicle quickly leaves the recognition range due to changing lanes or making turns, the
SCC system will control the vehicle to rapidly accelerate for a short time, and the driver has to pay
special attention.
Forward Collision Warning (FCW)
The FCW function can continuously monitor whether there are vehicles cyclists or pedestrians in front of
the car in the current lane. If the system detects that there may be a risk of collision, it will remind the
driver to stop in time to avoid accidents through visual and audible alarms. The FCW function works at
speeds greater than 10 km/h. You can set the sensitivity level of the FCW function on the control panel or
turn this function off. If the FCW function is turned off, the FCW/AEB function off indicator lamp on the
instrument will light up.
Forward collision warning/
automatic emergency brake
malfunction warning lamp
Forward collision warning/
automatic emergency brake
disabled indicator lamp
AIWAYS U5 | 141
To Next Page
Loading...
Need help?
General
