●
The lane lines on both sides of the current lane are not detected;
●
The driver's hands are off the steering wheel for a long time, and they fails to take over control of the
steering wheel after being prompted by the system;
●
In the process of steering interference applied by the vehicle, the driver contradicts the automatic
control;
●
The intelligent front camera is blocked;
●
The lane lines are too thin, damaged or blurred, leading to incorrect recognition;
●
When driving in to or out of a bend or sharp turn;
●
The road width is too narrow or too wide;
●
The vehicle drives through sections without lane lines;
●
The driver actively uses the turn signals to change lanes;
●
The driver activates the hazard warning lamps;
●
The vehicle is put in a gear other than drive;
●
The electronic stability program (ESP) is activated.
CAUTION:
●
Severe weather conditions such as rain, snow, smoke, hail, sand, and backlight will affect the stability
of the driving mode. It is not recommended to use the driving mode in severe weather.
●
During the operation of the SCC function, the driver's intense driving behaviors such as making a sharp
turn and changing lanes and stepping on the accelerator pedal will cause the SCC function to exit.
●
When there are complex traffic conditions around, such as merging, lane change, cut-in, cut-out,
intersection, etc., it is recommended that the driver actively take over the vehicle control.
●
It is recommended to turn off the SCC function when the vehicle is passing through bad road sections
such as road construction sites; when the vehicle is driving in low visibility conditions, on steep and
winding roads and slippery roads, it is recommended that the driver actively take over the vehicle
control.
SCC settings
AIWAYS U5 | 139
To Next Page
Loading...
