●
Radar or surrounding areas are impacted due to vehicle collision or scratching;
●
Rain, snow, fog, haze and other extreme weather conditions may affect radar performance;
●
Due to the limitation of radar recognition target characteristics, under rare circumstances false alarms
may be generated by some metal fences, plants or and concrete walls.
Lane Change Assist (LCA)
The LCA function mainly uses wave radar to detect overtaking vehicles that are approaching quickly in a
range of up to 80 meters behind the vehicle on both sides. When the overtaking vehicle approaches
quickly and meets the alarm conditions, the system will notify the driver through visual and auditory
signals so that they can avoid traffic accidents caused by overtaking vehicles from the side and rear during
lane changes.
When the LCA function is turned on, the vehicle speed is greater than 20 km/h, there are vehicles and
twowheelers approaching quickly from either rear side of the vehicle, and the alarm conditions are met,
the system will light up the exterior rear-view mirror indicator light on the corresponding side and transmit
a sound alarm to warn the driver to avoid a collision when changing lanes. This is based on the driver
actively turning on the turn light at the corresponding side.
You can set the LCA function alarm mode or turn off the function on the control panel.
154 | AIWAYS U5
To Next Page
Loading...
