respective left or right outside mirror to warn the driver that they need to focus on vehicles in the blind
spot.
You can set the alarm mode of the BSD function or turn it off in the control panel.
PATH: Vehicle control - Advanced driving assist - Blind Spot Detection (BSD)
WARNING:
●
The BSD function is a driver assistance function and cannot replace direct visual observation.
Even if the BSD function is equipped,the driver has to control the running traffic situation and drive
carefully always observing the traffic conditions to avoid accidents. Drivers shall not rely solely on the
BSD function to remind themselves that objects or vehicles appear near the blind spot or the side. Many
external factors can reduce the performance of BSD.
●
When the gear of the vehicle is switched to reverse gear, parking gear or the driving speed is lower than
15km/h, the BSD function will be automatically turned off.
The following conditions may lead to radar identification of obstacles and affect the performance of BSD,
including but not limited to:
●
The radar being disconnected, shielded or covered with soil, ice, snow, metal plates, adhesive tapes,
labels or leaves;
AIWAYS U5 | 153
To Next Page
Loading...
