3. Click the Carbit function icon on the IVI screen, and a mobile phone connection prompt will pop up with
detailed instructions for more information;
4. Open the mobile phone app, enable Bluetooth according to the pop-up prompt and map the mobile
phone screen to the IVI screen. At the same time, the Bluetooth channel is used for navigation, and the
IVI audio can be used to play navigation audio;
5. The “auto-rotation” function of the mobile phone screen should be turned on. When the mobile phone
screen is in landscape mode, the screen mapped to the IVI will also be landscape.
Carplay
Carplay is an app for connecting a mobile phone and IVI. The connection between a mobile phone and IVI
function of Carplay can map a navigation map, music, phone, information and other applications on the
mobile phone to the IVI screen, and supports the addition of third-party audio applications.
The Carplay application does not need to be installed and is built into the IOS system. Before use, you
need to enter the “Settings – General – Carplay on-board” path to enable the Carplay function. (Choose
a “USB only” connection when connecting; there is no need to enable Bluetooth)
The following situations may lead to the failure of normal connection and use of the connection between
mobile phone and IVI function:
●
The data cable used for connection only has charging function, no data transmission function. It is
recommended that you use the original data cable provided with the mobile phone (plug in again if
there is no response);
●
When the app is running, relevant permissions need to be obtained, such as the permission to “enable
USB debugging mode.” Some brands of mobile phones (such as Xiaomi) can automatically pop up the
“enable USB debugging mode” dialog box when connecting the IVI. Some brands of mobile phones
(such as Huawei) need to enter the developer mode to set it up. The general setting method is as
follows: “Settings – About phone – Version number.” Click the version number repeatedly until the
developer mode interface pops up. Enter the developer mode interface and enable the corresponding
permissions.
You can connect the mobile phone and the car according to the following operations:
80 | AIWAYS U5
To Next Page
Loading...
Need help?
General
