Child seat type recommendations are as follows:
●
Universal child seats mounted with the vehicle’s three-point seat belt.
●
ISOFIX child seats, mounted with special brackets on the left or right back seat.
●
i-Size child seats, based on ISOFIX mounting brackets on the left or right back seat.
Mounting child seats
CAUTION: When installing/uninstalling the child seat, always follow instructions from both the child safety
seat manufacturer and vehicle manufacturer.
NOTE: The rear seats are the preferred place for children to sit in with child safety seat.
Vehicle three-point seat belt fixation
After installing the child safety seat in the back seat, pull the seat belt across the child safety seat and
buckle the seat belt. Make sure the seat belt is flat and not twisted, pull the seat belt to make sure it is
securely fastened and cannot be pulled out.
ISOFIX/i-Size child seat fixation
1. Fit the cone-shaped ISOFIX connectors on the anchor rings located between the vehicle seat’s backrest
and cushion.
AIWAYS U5 | 39
To Next Page
Loading...
