Aiways U5 2021 - Windshield Wiper Operation

FRONT – front wiper
switch
REAR -rear wiper switch
Front windshield intelli-
gent washing
Rear windshield intelli-
gent washing
HI
High-speed mode
LO
Low-speed mode
AUTO
Automatic mode, rain
sensor
MIST
Tap on mode
ON
Rear wiper ON mode
OFF
Rear wiper OFF mode
Wiper sensitivity regula-
tor
Front wiper OFF mode
Automatic mode: Turn the wiper switch to this position to activate the rainfall sensor will be activated, so
that the wiper enters the automatic mode. The rainfall sensor can switch the wiper work mode
automatically according to the amount of water detected on the front windshield. Adjust the wiper
sensitivity regulator to adjust the sensitivity in the automatic mode; when the wiper sensitivity regulator
is switched to “HIGH,” the rain light sensor will react more sensitively than when it is on “LOW” and thus
the wiper will move more frequently.
Tap on mode: Move the wiper switch downward and release; the front wiper will move once.
CAUTION:
●
When the front wiper is working, use enough washing liquid. When the windshield wiper is working,
keep the glass surface wet and make sure that ice, snow and other contaminants have been cleared.
Under the condition of bad weather, first ensure that the wiper blades are not frozen or stuck on the
windshield glass.
62 | AIWAYS U5