52
5.7.1.3 Editing
Click a pad in the pad grid to edit the assignments for an individual pad.
• Note: Sets the MIDI note that the pad will play.
• Octave: Sets the octave of the MIDI note.
• MIDI Channel: Sets the MIDI channel that the note is played on.
• Poly On/Off: Enables or disables the pad from sending poly aftertouch messages.
• Send to USB: Enables or disables the pad from sending note data over USB.
• Send to MIDI: Enables or disables the pad from sending note data over MIDI.
• Send to CV: Enables or disables the pad from sending note data over CV.
• Pad On Color: Sets the color of the pad when the note is pressed.
• Pad Off Color: Sets the color of the pad when the note is released.
Note: When editing colors, you can click on the color swatch to open the color picker to select a new color. You
can also directly enter a hex code in the field next to the color swatch, or in the color picker window.
Use the Show LED Color option to switch between the Pad Off color and Pad On color from displaying in the
window.
To Next Page
Loading...
Need help?
General
