Akai APC64 - Page 54

54
Drum Group
• Root Note: Sets the starting note of the pad group.
• Base Octave: Sets the starting octave for the pad group.
• MIDI Channel: Sets the MIDI Channel of the pad group (1–16).
• Poly On/Off: Enables or disables the pad group from sending poly aftertouch messages.
• Send to USB: Enables or disables the pad group from sending note data over USB.
• Send to MIDI: Enables or disables the pad group from sending note data over MIDI.
• Send to CV: Enables or disables the pad group from sending note data over CV.
• Pads On Color: Sets the color of the pad when the note is pressed. You can enter a hex value or use the color
picker to select a color.
• Pads Off Color: Sets the color of the pad when the note is released.