141
Pad Mute Mode
Pad Mute Mode lets you easily mute pads within a program or set mute groups for each pad
within a program.
To enter Pad Mute Mode, do either of the following:
• Press Shift+Track Mute/Pad Mute.
• Press Menu, and then tap Pad Mute.
There are two tabs you can view in this mode: Pad Mute or Pad Group. Tap each button in the lower-left corner to
select it. See the following Pad Mute and Pad Group sections to learn about each.
Use the Program field at the top of the touchscreen to select a program.
The time counter in the upper-right corner the current playhead position. This is shown in most of the modes. See
General Features > Time Counter to learn about this.
The automation button indicates the global automation state. This is shown in several modes. See General Features
> Automation to learn about this.
Time Correct lets you quantize pad mutes. This is useful when you want your mutes to line up with a specific time
division. For example, with Time Division set to 1 Bar, your mutes will always align with the beginning of the measure
immediately after you press the pad.
Tap Time Division at the bottom of the touchscreen, and select a value from 1/16 to 2 Bars (T indicates a triplet-
based time division).
Tap TC at the bottom of the touchscreen to enable or disable the Time Correct feature.
To Next Page
Loading...
Need help?
General
