54
Mode
Tap this icon to switch MPC X between Standalone Mode
and Controller Mode. In the screen that appears, select
whether you want to save your current project before
switching (Save), switch without saving your project (Don’t
Save), or stay in the current mode and project (Cancel).
You cannot freely switch between Standalone and
Controller Modes without also closing your current project.
System Resources
Tap one of these icons to show the System Resources
window.
The indicators in this window show current usage statistics:
CPU: The first indicator shows the current CPU as a
percentage.
RAM Usage (Mem): The second indicator shows MPC
X’s current RAM usage.
To delete samples from the project (to create more free
RAM space for sampling time, audio recording, etc.), tap
Purge. In the screen that appears, tap Unused Samples
to delete all unused samples from the project, tap All
Samples to delete all samples from the project, or tap
Cancel to return to the previous screen.
To close the System Resources window, tap OK, the X
in the upper-right corner, or anywhere outside the window.
To Next Page
Loading...
Need help?
General
