81
The Delete Bars function removes a range of bars from a sequence.
To select the sequence whose bars you want to delete, use
the Sequence field.
To set the range of bars you want to delete, use the First Bar
and Last Bar fields. The bar in each field and all bars in
between them will be deleted.
To confirm your choice, tap Do It.
To return to the previous screen, tap Function or anywhere
outside the window.
To cancel and return to Main Mode, tap Cancel.
The Insert Bars function adds empty bars to a sequence at a
specified point.
To select the desired sequence, use the Sequence field.
To set how many bars you will insert, use the # of Bars field.
To set the time signature of the inserted bars, use the two
Time Sig fields.
To set where you will insert the bars, use the Before Bar
field. The bars will be inserted before this one.
To confirm your choice, tap Do It.
To return to the previous screen, tap Function or anywhere
outside the window.
To cancel and return to Main Mode, tap Cancel.
The Half Length function will immediately halve the length of the
sequence (without deleting any note events).
The Double Length function will immediately double the
sequence and copy all events from the first half to the second half.
To Next Page
Loading...
Need help?
General
