87
While using audio tracks, you can use any of these functions as
described below.
To return to Main Mode, tap Cancel or the left arrow () in the
upper-left corner of the touchscreen. Alternatively, press Main.
To edit the name of the track, tap the top of the touchscreen
and use the virtual keyboard that appears.
The Delete function erases the entire audio track.
To confirm your choice, tap Clear.
To return to the previous screen, tap Cancel.
The Clear Regions function erases all regions from the audio
track without erasing the track itself.
The Reset Channel Strip function:
• clears all Insert effect slots;
• turns Mute, Solo, automation, and Monitor off;
• resets the pan knob to the center;
• resets the level slider to 0.00 dB; and
• turns the Record Arm button off.
It does not change the track’s inputs or outputs.
The Copy Track function copies the contents of one track to
another.
To select the “source” track, tap the Copy Contents of
Track field. This is the track whose events you want to copy.
To select the “destination” track, tap the Over Contents
of Track field. This is the track where the source track will
be copied.
To confirm your choice, tap
Do It.
To cancel and return to Main Mode, tap Cancel or
anywhere outside the window.
To Next Page
Loading...
Need help?
General
